Reliable inspection of holes and screws: at press speed.
At a manufacturer of stamped and sheet metal parts, the parts drop directly at the stamping press onto an irregular conveyor belt in varying orientations: roughly every three seconds, two parts pass in front of the cameras side by side. The inspection task is deliberately narrow: on the two sheet metal variants with 7 or 8 holes, are all holes present and fully punched through, and is the hole free of residue or burrs? On a second part, the system also checks whether all three screws are present. Every decision (OK or NOK) is output directly with a confidence value per characteristic.
OK/NOK decision with confidence value
Every decision is output directly with a confidence value per characteristic.
Consistent inspection where manual work reaches its limits
With varying orientations and around two parts every three seconds, the system delivers a fast, consistent OK/NOK decision per characteristic: for both sheet metal variants and the additional screw check. This relieves inspection exactly where purely manual visual inspection at press speed reaches its limits.
How narrowly defined is your inspection task today?
We look at your part, your cycle and your inspection characteristics: and assess whether a comparable solution is a good fit.